Panasonic AG-DVX200AN Operating Instructions Manual Download Page 162

Page: 162 / 203

- 162 -

∫

[REC FORMAT] settings that support main recording of dual codec recording

(When [DUAL CODEC REC] is set to [FHD 50Mbps])

(When [DUAL CODEC REC] is set to [FHD 8Mbps])

≥

This function is not available in the following cases:

When [OUTPUT BITS] is set to [4:2:2(10bit)]

In Variable Frame Rate Mode (

)

When [REC MODE] is set to [AVCHD] (

141

)

When the size of [REC FORMAT] is set an option other than UHD (3840

2160)

During the Interval Recording (

162

)

A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is
recorded as a short time motion picture.
One frame is recorded every recording interval that is set.

≥

The number of frames per second differs depending on the frame rate of [REC FORMAT].

When the frame rate is set to 59.94i or 29.97p: 30 frames for a scene of 1 second

When the frame rate is set to 50.00i or 25.00p: 25 frames for a scene of 1 second

When the frame rate is set to 24.00p or 23.98p: 24 frames for a scene of 1 second

≥

Set [OUTPUT BITS] to [4:2:2(8bit)]. (

)

≥

[I-] is displayed on the screen. The icon changes to [I-REC] after recording starts.

≥

After recording, the setting of Interval Recording is canceled.

≥

Audio cannot be recorded.

Recording mode

System frequency setting

Recording format

MOV, MP4

[59.94Hz]

UHD 2160/29.97p 100M,
UHD 2160/23.98p 100M

[50.00Hz]

UHD 2160/25.00p 100M

Recording mode

System frequency setting

Recording format

MOV, MP4

[59.94Hz]

UHD 2160/29.97p 100M,
UHD 2160/23.98p 100M,
FHD 1080/59.94p

FHD 1080/59.94p 100M,
FHD 1080/29.97p

FHD 1080/23.98p

[50.00Hz]

UHD 2160/25.00p 100M,
FHD 1080/50.00p

FHD 1080/50.00p 100M,
FHD 1080/25.00p

[INTERVAL REC]

[OFF]/[1 SEC.]/[10 SEC.]/[30 SEC.]/[1 MINUTE]/[2 MINUTES]

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands