8/19/03
910-198E
Model 8500
Page 1-5
Refer to the illustrations above to identify the different gage features,
especially the Primary and Secondary Display.
•
The top portion of the display shows Datalogger information
including filenames, ID numbers, and stored thickness values
for your reference while making measurements.
•
The middle portion of the screen is split into two (2) sections.
The Primary display, located in the main area of the screen,
shows current thickness measurements. The Secondary Display
is located beneath the Primary Display and shows minimum,
maximum, and differential measurements.
•
The bottom portion of the screen displays the dialog box that
contains helpful information for calibrating, operating, and
diagnosing the gage. Instructions, status conditions, and error
messages are also displayed in the dialogue box. The far right
section of this portion continuously shows flags that describe
the battery condition and operating mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
