Palm Tungsten Tungsten T Handhelds Handbook Download

Page: 210 / 290

Chapter 17

Setting Preferences for Your Handheld

200

Enter your password, and then tap OK.

Tap Done.

To unmask individual records:

Select a masked record.

If you do not have a password, a masked record becomes visible.
If you have a password, the Show Private Records dialog box appears. Go to
step 3.

Enter your password, and then tap OK.

To make a record private:

Display the entry that you want to make private.

Tap Details.

Tap the Private check box to select it.

Tap OK.

Sounds & Alerts Preferences

You can choose from three Sound & Alert profiles:

TIP

When you connect a headset to your handheld, the external speaker is

automatically silenced, the Sounds & Alerts settings are maintained, and all volume
levels are automatically adjusted for use with a headset.

Tap Show
Private
Records

Custom

Configure this profile with your own personal settings.

Silent

Select this profile to use the vibrate and indicator light alerts
without sound.

All Off

Select this profile to turn off all sounds and alerts.

Summary of Contents for Tungsten Tungsten T Handhelds



































































































































































































































































































Search results

Summary of Contents for Tungsten Tungsten T Handhelds

Reviews:

Related manuals for Tungsten Tungsten T Handhelds

Brands by name

Popular brands

Palm Tungsten Tungsten T Handhelds, Handbook

Search results

Summary of Contents for Tungsten Tungsten T Handhelds

Reviews:

Related manuals for Tungsten Tungsten T Handhelds

Brands by name

Popular brands