![background image](http://html1.mh-extra.com/html/palm/pixi-plus/pixi-plus_user-manual_748171228.webp)
228
3C. Web and Wireless Connections
3.
Initiate a pairing from the other device.
4.
When the connection request appears, tap
Yes,
allow
.
5.
If a passkey is not required, pairing is complete
when the Devices list appears. If a passkey screen
appears, do one of the following:
䡲
An automatically generated passkey appears on the
passkey screen:
Check the other device screen to
verify that the passkey is correct, and tap
Yes,
connect
to connect.
䡲
The screen displays a passkey generated by your
phone
:
Enter the displayed passkey on the other
device.
䡲
The screen prompts you to enter a passkey:
Check
the documentation that came with the other
device to see if there's a required passkey. If so,
enter that passkey on your phone. If not, make up
a passkey and enter it on both devices.
Connect With a Paired Device
After you pair with a device, you can connect to that
device without having to go through the pairing
process again.
1.
Open
Bluetooth
.
Note:
To connect with a paired computer, you must initiate
the connection from the computer. See the computer
documentation for instructions.
Summary of Contents for Pixi Plus
