manualshive.com logo in svg

PALAZZANI RAGNO TSJ 30.1, Operation And Safety Manual

Share
Download
PALAZZANI RAGNO TSJ 30.1 Operation And Safety Manual Download Page 89

Tel. 0039 030 6857073 - Fax 0039 030657079           [email protected] - www.palazzani.it

Pag.  81

OM4044_US

4.4. 

   STABILIZERS  RECOVERY

This operation is not included in the emergency procedures because the arm must have 
already been lowered and the people removed from the nacelle; however, it may be 
necessary to close the stabilizers for loading onto trucks to a repair shop..
Recovery has to be executed following this path:

1.  insert manually the valve EV09 (fi g. 4.2)
2.  insert EV06 by screwing the pin completely (fi g. 4.8) 
3.  from the distributor (fi g.4.5), move the right track lever VD1 forward and at the 

same time press one of the stabilizers electrovalves caps of EV11, EV12, EV13 
ed EV14,  one at a time until they are completely recovered (Fig. 4.9).

Fig. 4.8

Fig. 4.9

EV14

EV7

EV13

EV12

EV11

EV6

Summary of Contents for RAGNO TSJ 30.1




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands