manualshive.com logo in svg

PALAZZANI RAGNO TSJ 30.1, Operation And Safety Manual

Share
Download
PALAZZANI RAGNO TSJ 30.1 Operation And Safety Manual Download Page 23

Tel. 0039 030 6857073 - Fax 0039 030657079           [email protected] - www.palazzani.it

Pag.  14

OM2016_US

 !

WARNING

THE MACHINE IS FOR PROFESSIONAL USE EXCLUSIVELY

 

NOTE
THE RULES OF THIS MANUALS CAN NOT COVER PARTICU-
LAR SITUATIONS WHIC CAN OCCUR DURING THE DIFFE-
RENT INSTALLATION AND/OR FUNCTIONAL PHASES

WARNING

Do not carry out any maneuvers if you do not know the reactions generated 
by the controls.

WARNING

NEVER USE a damaged or modifi ed machine (in respect to the original 
confi guration).
In presence of damages or variations in respect to the original confi guration, 
inform immediately the safety responsible about the noticed non-conformity.

WARNING

In case a plate or a safety sticker is worn, damaged or   not perfectly readea-
ble, inform  the safety responsible, who will have to replace them immedia-
tely.

SMOKE IS NOT ALLOWED
During the operations, the operator hands must be free from other and dan-
gerous objects, to be reactive in case of need.
For this reason, during the machine use smoke is not allowed

Summary of Contents for RAGNO TSJ 30.1




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands