Tel. 0039 030 6857073 - Fax 0039 030657079 [email protected] - www.palazzani.it
Pag. 62
OM3203_US
DANGER
Fix the safety belt to the anchor rings (with a rope not longer than 1 meter)
before performing any movement (Fig. 3.13).
Act on the choosen control panel
levers, to perform the movements,
avoiding sudden maneuvers.
First lift the fi rst boom around 45°
and than open the jib to get away
from the boom; then you can procede
with turntable rotation and telescopic
extensions.
Do not make abrupt maneuvers or
sudden inversions in movements to
not counterblow the cage.
The more the telescopic are extended the lower must be the transfer.
To go back to rest position, retract the extension completely, close the jib, straighten
the cage eventually rotated, put the chassis on axle rotating the turntable and lower
with the fi rst boom until the green light turn on (Fig. 3.10).
The above mentioned green light activates only when the booms are:
completely retracted, on the longitudinal axle in respect to the chassis towards the
diesel engine. From this moment it is possible to lift the stabilizers selecting the stabilisers
symbol with the key Fig. 3.1 part 2 and proceding as described in the dedicated paragraph.
Fig 3.13
