Tel. 0039 030 6857073 - Fax 0039 030657079 [email protected] - www.palazzani.it
Pag. 33
OM2016_US
• legs (mechanical parts falling if not properly hold),
• eyes (dangers generated by pression fl ows and elements in tension),
• head (hit with some machine parts).
Read the description in paragraph 2.9.2 carefully, most of all regarding the elements
remaining under pressure with the pneumatic energy sectioned
.
SHOCK HAZARD
During the troubleshooting or during a maintenance operation, make
sure the machine is not connected to electricity, because the risk of
electric shock can be caused by direct contact or by indirect contact.
WARNING
Before plugging to electricity, be sure there’s no maintenance intervention
on and anybody is operating with the machine
2.8.4.
Explosive atmosphere
The machine is not designed to work in explosive or classifi ed environments. The ma-
chine is not suitable therefore to operate in areas:
• totally or partially explosive
• classifi ed
• in which corrosive atmospheres are present
• in which high concentrations of gas and / or dust are present
• in which high oily concentrations are present in suspension
• with risk of fi re deriving from any material or source of ignition.
!
WARNING
It is strictly forbidden to use the machine in all above mentioned areas
2.8.5.
Slipping
Possible lubricants leaking can cause the slipping of operating personnel.
!
WARNING
Access those area with non-slip and always cleaned shoes; inspect them
periodically depending on usage.
2.8.6.
Stumbling
The messy deposit of material can typically create a tripping hazard and limitate the
partial or total emergency exit in case of need. Ensure the operational areas, transit areas
and emergency exits to be free from obstacles and to fulfi l the compliance requirements.
