Tel. 0039 030 6857073 - Fax 0039 030657079 [email protected] - www.palazzani.it
Pag. 61
OM3203_US
3.12.
AERIAL WORK
Access to the platform
!
WARNING
Do not start an aerial work without an assitant from the ground, whose
presence is compulsory to recover the cage to the ground in case of con-
trol system defeat.
DANGER
Operators must not exit and access from the cage from high position.
DANGER
Stay on the cage only for lifting and working in high position. During the
transfer, operators must not stay on board.
Protections don’t grant all risks from a possible overturn. If the light and the overloading
acoustic alarm activates, quickly download the exceeding load.
If the cage has to lift beyond an obstacle (river, diffi cult ground..) it is advisable to
try before with a similar weight (ie. 2 persons) and check if the boom reaches the
wished position without stopping.
After positioning the stabilisers on the ground and leveling the chassis, the machine is
ready for aerial work; the control panel at the cage must be activated by means of the
proper selector, fi
rst (part 2 Fig. 3.1 left position).
IMPORTANT
Before performing any turntable movement, take the rotation locking pin
off Fig. 3.12
From the control panel at the cage, the boom
movements are allowed. In fi g. 3.5 all maneu-
vers are indicated, with the relative joysticks.
It is, however, possible to activate the control
of the aerial movement also from a diffe-
rent position, with the proper key (in case of
maintenance, settings, training course, etc.).
Fig 3.12
