Fig. 2.1
Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 15
OM2016_US
The platform must be stabilized on compact ground - otherwise it is always recommen-
ded to place wooden boards under stabilising-legs, to increase the contact area and to
reduce the specifi c pressure on the ground.
DANGER
Never go in or out the cage when it is in aerial position or extended.
Enter the cage only when it is in parking position.
2.4.
SPECIAL
INDICATIONS
Although the platform is specifi cally designed for personnel
lifting and aerial work, it can be used exclusively by trained
operators, working in conformity with general safety stan-
dards and following the specifi c instructions of this manual.
NOTE
Read carefully the directions for use and main-
tenance.
During sloping transfer, keep the cage towards the slope by
keeping away from scarps, landslide zones, deep holes and
study the way considering the necessary steering radius.
Use the transfer controls, away from the base machine, by
using the belt.
In cold temperatures, start the engine and let the oil warming
for 5 min before the fi rst maneuvers which need slow speed.
2.3.
INTENDED
USE
This machine is designed and manufactured as aerial work platform, to lift persons to
the working sites and let them work from the cage, with the possibility to enter and
exit from the cage only from the ground and when booms are not extended.