Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 41
OM2016_US
To drive to the ramp, lift the cage to avoid any contact against the ramp, as shown in
drawing 2.12 and 2.12a. See the cage lifting without stabilization procedures, indicated
in the paragraph 3 (button FN).
When the machine is in the truck bed, fi x it to the lorry bed eyes bolts, by means of 4
turnbuckles as in Fig. 2.13 and 2.13b, and fi x the boom and jib using one belt like sho-
wed in Fig. 2.13a and 2.13b.
!
WARNING
During transport, lock the slewing gear rotation with the proper pin indi-
cated in chapt. 3.
!
WARNING
When transporting the machine on the truck, it is forbidden to place the
jib / arm on any type of support. If necessary, it is advisable to contact
Palazzani Industrie S.p.A.
Fig. 2.13
Fig. 2.13a
Fig. 2.13b
Fig. 2.13d