manualshive.com logo in svg

PALAZZANI RAGNO TSJ 30.1, Operation And Safety Manual

Share
Download
PALAZZANI RAGNO TSJ 30.1 Operation And Safety Manual Download Page 126

Tel. 0039 030 6857073 - Fax 0039 030657079           [email protected] - www.palazzani.it

Pag.  98

OM6010_US

 

Disposal Electrical and Electronic Equipment (RAEE) under the 
ROHS Directive.
The electrical and electronic equipment (RAEE) showing this symbol 
must be recycled.

If the used materials, lubricants and water condensation are not disposed of according to 
the laws and regulations, there may be residual risks such as:
• enviromental 

pollution

•  intoxication of the people responsible for disposal.

 

OPERATING NOTE

For further questions about the procedure of the machine demolition or 
topics not covered in this document, contact the manufacturer.

The machine contains about 0.05% by weight of non-recyclable material.

6.3. CONTROL 

 

REGISTER

This control register is released by PALAZZANI INDUSTRIE S.p.A. to the user of the 
Ragno mentioned on the cover, in accordance with Annex I della Direttiva 2006/42 CE.

6.3.1.  

Storage instructions

This register must be considered like a part of the Operation Manual and it must be with 
the machine for all its life, till the fi nal disposal.

6.3.2.  

Instructions for fi lling

These instructions are provided in accordance with the regulations known before the 
marketing date of this Ragno. New regulations could be intervene to change the obliga-
tions of the user.
The register is designed to record, according to the proposed schemes, the following 
events concerning the useful life of the aforementioned Ragno:

• property 

transfer

•  replacement of engine, gears, structural elements, safety devices and components
•  damage of a certain entity and related repairs
•  scheduled maintenance in Chapter 5 of this User and Maintenance Manual

Summary of Contents for RAGNO TSJ 30.1




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands