Tel. 0039 030 6857073 - Fax 0039 030657079 [email protected] - www.palazzani.it
Pag. 113
OM5055_US
x
Turntable encoder
Follow these instructions to check the encoders on the turntable:
1) move the boom perfectly in the center
2) now from the display, check the encoder values: both must be around the reference.
The difference betweeen the two values can’t exceed the “Max. diff”.
x
Boom angle
Follow these instructions to check the inclinometer on the boom:
1) position the main arm at 0 ° perfectly horizontal with the help of an inclinometer
2) now from the display, check the angle values: both must be aroun the reference.
The difference betweeen the two angles can’t exceed the value indicated with “Max. diff”.
x
Boom extension
Follow these instructions to check the extension of the boom:
1) retract completely the boom
2) check from the display the extension values, both must be around 0.
3) extend completely the boom in the vertical position
4) check from the display the extension values, both must be around 100%.
The difference betweeen the two extensions can’t exceed the value indicated with “Max.
diff”.
x
Basket weight
Follow these instructions to check the basket load sensor:
1) remove everything from the basket (it must be empty)
2) from the display, check the values of the sensor in the basket: both must be around the
reference.
The difference betweeen the two weights can’t exceed the value indicated with “Max. diff”.
!
WARNING!
Inform the responsible personnel of any problem encountered.
