User’s Manual
6
②
Quit:
Click to quit the system.
③
Login/Logout:
Click to log in or log out the system. Refer to the
Logging In/Out the System
section (p. 2) for
details.
④
Screen Mode Buttons:
Click the desired screen mode. Move the cursor to that image and double click the left
mouse button to view a specific image in the single-screen mode. Click the left mouse button in the window to return
to the previous screen mode from the single-screen mode.
⑤
Utility Buttons:
See the
Utility Buttons
section (p. 2) for details.
⑥
Camera Buttons:
Click the individual camera buttons to display the selected camera. Click the
or
button
to display the previous or next camera button panel.
⑦
Event Logging:
Displays system events. To scroll up and down the list, hold down the left mouse button on the
list and move the cursor up and down, or roll the mouse wheel on the list. Clicking the underlined event in the list
initiates the SmartSearch program and moves to the timetable allowing you to play back the event-detected video
if the underlined event is recorded. The display information of the event log is as follows: ‘Date’
_
’Time’ ‘Event
type’ ‘Camera No.’
:
‘Camera title’
⑧
POS:
Click to display POS control buttons. The system status window will display the POS data. Click the right
mouse button on the window to toggle two display modes: POS data display mode, and event log including POS
data display mode. The POS button LED will be lit while the data is coming from the POS. If you do not want to
display the data from the POS, release the target POS number button. If the user disables the POS device during
the Text-In setup on the SmartGuard, the POS button will be disabled.
⑨
Alarm Control:
Click to display alarm control buttons. You can check the alarm status and control the alarm output.
Pressed alarm button is active mode, and released button is inactive mode. The user can active or inactive alarm
output manually by clicking the button when it is released or pressed. If the user disables the alarm during the Alarm
setup on the SmartGuard, the alarm button will be disabled. Click the left or right arrow buttons to display the previous
or next alarm button panel.
①
PTZ:
Click to display PTZ control buttons. Refer to the
PTZ
section (p. 2) for details.
②
Image Adjustment:
You can adjust the brightness, contrast, hue and saturation of live
image by clicking the designated buttons. Click the
Default
button to reset them to the
default settings. These adjustments should not be used to correct improperly set cameras or
monitors. Also, it is important that images are properly adjusted.
③
System Status:
Displays date and time, the remaining hard disk space, operating mode
and the type of hard disk usage. Refer to the
Utility Buttons
section (p. 2) for details.
Logging In/Out the System
Log In:
Click the
Logout
button after logging out, the
User Login
dialog box appears. Enter the
User ID
and
Password
and then click the
OK
button if you want to log in the system. If the login fails more than three times,
the buzzer will be activated for three minutes. The successful login can stop the buzzer trigger during the buzzer
activation. The log for failed login as well as successful login will be displayed on the system status window.
Log Out:
Click the
Login
button after logging in, the
Quit
dialog box appears. Click the
Yes
button if you want
to log out the system.
NOTE:
When
No local login
is selected during the
Setting Up the Authority
setup section (p. 2
)
, the DVR does not
ask login procedure.
NOTE:
When you forgot the password, ask your dealer or distributor.
Summary of Contents for H264
