Pacific S Series, Parts & Operating Manual

Page: 3 / 76

NOTE: Do not allow the brush/pad to operate while the machine is stationary to avoid damage to the floor.
CAUTION: Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.
CAUTION: Before leaving or servicing a machine, stop it on a level surface.
NOTE: Before leaving or servicing a machine, turn off the unit and remove the key.
CAUTION: When servicing the machine, avoid moving parts. Do not wear loose jackets, shirts or sleeves
WARNING: When servicing the machine, do not wear jewelry when working near electrical components.
WARNING: When servicing the machine, disconnect battery connections before beginning work.
NOTE: Do not power spray or hose off the machine. Electrical malfunction may occur.
WARNING: When servicing the machine, do not work under the lifted machine without supporting it with safety stands.
NOTE: When servicing the machine, use manufacturer supplied or approved replacement parts.
NOTE: All repairs must be performed by a qualified service person.
CAUTION: When servicing the machine, do not modify the machine from its original design.
NOTE: When transporting the machine, turn the machine off.
CAUTION: When transporting the machine, do not lift the machine when batteries are installed.
CAUTION: When transporting the machine, get assistance when lifting the machine.
NOTE: Use a recommended ramp with a maximum of a 12 ° maximum incline when loading or unloading into/off truck or trailer.
NOTE: When transporting the machine, use tie down straps to secure the machine to the truck or trailer.
NOTE: When transporting the machine, put the scrub head in the lowered position. Make sure the unit is off before doing so.
WARNING: Do not charge the batteries if the battery charger cable or plug is damaged.
WARNING: When charging batteries, do not smoke near the machine.
NOTE: When storing the machine, always store it indoors in an area where the temperature is between 32
o
and 104
o
F (0
o
and 40
o
C)
NOTE: Replace any and all safety labels located on the machine if they are missing or become damaged or illegible.
SAFETY PRECAUTIONS