P G . 1 3
Pacbrake is a registered trademark of Pacbrake Co.
INLINE MOUNT - FORD 6.0L
L5501
13
34
Route the grey and black harness wires to the
pressure switch assembly and connect.
Secure the harness with the tie-straps provided.
35
Route the orange and black harness wires to the solenoid
valve mounted in the frame and connect.
Secure the harness with the tie-straps provided.
36
Connect the passenger side positive battery terminal
including the red fused wire with an eye terminal of the
Pacbrake harness. Then connect the passenger side
negative battery terminal including the black wire with an
eye terminal of the Pacbrake harness. Then reconnect
the driver side positive followed by the negative battery
terminals.
Secure the Pacbrake harness with the tie-straps provided.
Re-install the lower dash panel.
