P G . 2
Pacbrake is a registered trademark of Pacbrake Co.
INLINE MOUNT - FORD 6.0L
L5501
2
GETTING STARTED
Thank you and congratulations on your purchase of a Pacbrake exhaust retarder.
Before starting the installation, please read the entire installation manual carefully and be sure you have a full
understanding of the installation. Check that your Pacbrake kit is correct for the application and contains all the
necessary parts shown in the photo below.
C40010 - Manual Shift Transmissions
C40007 - Automatic Shift Transmissions
Note: The kits listed above are for vehicles with stock
exhaust. If you have aftermarket 4
"
exhaust you will
need to order two exhaust adapter part # C11342
KIT CONTENTS
(C40010)
KIT CONTENTS
(C40007)
A ½ gallon air tank is supplied to speed up the actuation
of your Pacbrake and provide an air source for limited
accessory use. Also provided is a 5 in 1 inline inflation/
deflation kit with a 25' coil hose with zippered storage bag.
Please note: The air compressor has a 33% duty cycle,
this is well above the exhaust brakes requirement.
Caution must be exercised when using the compressor
and inflation kit for other uses. Please consider the air
compressor’s duty cycle when continually in use for
more then 3 minutes, failure to do so may allow the air
compressor or hoses to overheat causing failure.
