17
5. ATTACHMENT
Fitting the Attachment
1. Loosen the attachment lock knob on the
engine shaft connecting piece.
2. Pull the lock pin and push the lower shaft
carefully into the shaft connecting piece.
3. Ensure that the lock pin latches into the
hole in the lower shaft, you may need
to turn the lower shaft slightly to enable
correct fitting.
4. Tighten the lock knob.
Fitting the Extension Pole Attachment
Depending on the required working height, the extension pole attachment can
be fitted between the engine unit and the Pole Pruner or Pole Hedge Trimmer,
as described above.
