![background image](http://html.mh-extra.com/html/ozito/asg-7000/asg-7000_instruction-manual_1666498016.webp)
8
5. Ensure the pressure control dial is set to
medium and flip the priming lever to the
spray position.
6. Aim the spray gun at the waste bucket, then squeeze and
hold the trigger until most of the paint is removed from the
high pressure hose.
Note:
Submerging the tip into the solvent before spraying will
help to reduce back spray and splatters.
Note:
If no spray comes out of the spray gun, the tip may
have dried and clogged. Switch off the unit and follow the
cleaning procedure for the spray tip in the ‘
CLEANING THE
SPRAY GUN
’ section of this manual.
7. Lock the spray gun trigger and rotate the spray tip by 180°.
8. Unlock the trigger. Squeeze and hold the trigger to spray solvent
through the gun & high pressure hose.
9. Repeat step 8 until only solvent is emitted from the spray gun.
Continue topping up the rinsing bucket with solvent as required.
10. Perform the
Pressure Release Procedure.
11. Disconnect the inlet hose & return pipe from the sprayer,
shake out any excess solvent and allow to dry.
SPRAY
PRESSURE
CONTROL
WASTE
WASTE
a.
b.
Summary of Contents for ASG-7000
Page 24: ......