![background image](http://html.mh-extra.com/html/ozito/asg-7000/asg-7000_instruction-manual_1666498019.webp)
11
When a spray tip starts to wear, the orifice gets bigger and rounder reducing the fan pattern
size. This can result in less control and more overspray during use.
Some signs to look out for include:
• Painting takes longer than usual,
• More paint is consumed than usual,
•
The finish is uneven and more runs appear than is usual.
If this issue occurs, do not try to compensate by increasing the spray pressure; this will
just waste spray material and increase wear on the pump. Replace the worn tip. Correctly
replacing the worn spray tip when necessary can improve the working life of the sprayer.
To help extend the life of spray tips,
• Spray at the lowest pressure that provides an even spray pattern;
• Filter the spray material with a stainer (not supplied) before use;
•
Clean the filters after every use;
• Clean the spray tip with the soft-bristled brush.
6. WORN SPRAY TIPS
WARNING!
BEFORE CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE TOOL IS DISCONNECTED FROM THE POWER
SUPPLY TO PREVENT ACCIDENTAL STARTING.
MAINTENANCE
NEW TIP
WORN TIP
Summary of Contents for ASG-7000
Page 24: ......