![background image](http://html.mh-extra.com/html/ozito/asg-7000/asg-7000_instruction-manual_1666498018.webp)
10
4. Unscrew the nut below the handle using a 19mm spanner
and a shifter (not supplied).
Note:
Using a shifter or bench vice to hold the upper part of
the spray gun will make this step much easier.
5. Unscrew the handle and remove the
mesh filter. Clean all components in the
solvent.
6. To clean the mesh filter, remove the cap at the end of the filter and pull the mesh section off.
Use the supplied brush to scrub the inside of the mesh filter.
Note:
After cleaning, inspect the condition of the filter. If the mesh filter is clogged with dried
paint, has started fraying, or has deformed out of shape, it will need to be replaced.
7. Wipe down all parts of the spray gun and allow to dry before re-assembling.
Summary of Contents for ASG-7000
Page 24: ......