![background image](http://html.mh-extra.com/html/ozito/asg-7000/asg-7000_instruction-manual_1666498003.webp)
Locking The Spray Gun Trigger
The spray gun trigger should be locked prior to priming the spray
station to prevent accidentally activating the spray gun.
1. To lock the spray gun trigger, rotate the
trigger locking lever clockwise until it
points rearwards.
2. To unlock the trigger, rotate the trigger
locking lever anti-clockwise.
Paint Preparation
You do not need to thin paint for use
in this spray gun. The inlet hose and
return pipe can be placed directly
into the paint tin for spraying.
For best results we recommend
straining the paint prior to use.
This will improve the final result by
eliminating any contaminants and
lumps present in the paint.
WARNING!
PAINTING CAN BE MESSY, AND SPRAY
MATERIALS MAY BE EMITTED AT HIGH PRESSURE
FROM THE SPRAY GUN. WEAR APPROPRIATE
SAFETY GEAR AND ENSURE SURFACES YOU DO
NOT WANT TO GET PAINT/SPRAY MATERIAL ON
ARE ADEQUATELY COVERED AND PROTECTED.
Spray Tip & Guard
Note:
The spray gun comes assembled from the factory. If the spray
gun has been disassembled for cleaning or priming, follow the steps
below to re-assemble.
1. Push the mesh filter into the
spray head and then insert
the handle over the mesh
filter.
2. Ensure the trigger guard is
attached to the handle and
tighten the handle using a
19mm spanner.
3. Screw the tip guard loosely
onto the spray gun and insert
the spray tip into the tip guard.
4. Fully tighten the tip guard onto
the spray gun with the 27mm
spanner.
2. PREPARING THE MACHINE
WARNING!
ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
WARNING!
THE TOOL IS RECOMMENDED FOR
USE WITH A RESIDUAL CURRENT DEVICE WITH A
RATED CURRENT OF 30mA OR LESS.
Summary of Contents for ASG-7000
Page 24: ......