![background image](http://html.mh-extra.com/html/ozito/asg-7000/asg-7000_instruction-manual_1666498002.webp)
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
Frame Connection
1. Insert the paint station into the frame,
aligning the 4 bolt holes (2 either side).
2. Place a spring washer and then a
washer onto each bolt. Insert the bolt
assemblies into the bolt holes and
tighten using the supplied hex key.
Hose Connection
Note:
The air caps on the paint station and air hose will need to be
removed prior to connection.
1. Connect the high pressure hose to the
paint outlet and tighten clockwise.
2. Connect the other end of hose to the
gun inlet and tighten clockwise.
3. Ensure all connections have been
correctly tightened with a 19mm
spanner on the hose, and a 17mm
spanner to hold the connection.
4. Connect the inlet hose and return pipe
to the paint station.
5. Secure the inlet hose by
tightening the screw on the hose
clamp.
1. Carry Handle
2. Paint Outlet Port
3. Power Cord
4. Priming Lever
5. Return Pipe Port
6. Frame
7. Return Pipe
8. Inlet Filter
9. Inlet Hose
10. Sprayer Unit
11. Inlet Hose Port
12. Pressure Control Dial
13.
On/Off Switch
14. Handle
15. Spray Gun Inlet
16. Spray Gun Trigger
17. Handle Guard
18. Tip Guard
19. Spray Tip
20. Trigger Locking Lever
AIRLESS SPRAY GUN
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
14
15
2
11
3
4
5
6
18
17
16
13
19
10
12
20
7
8
9
WARNING!
ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Summary of Contents for ASG-7000
Page 24: ......