OWC Jupiter Mini-SAS
SySteM MAintenAnCe
6. Place the new expander board inside the unit,
making sure to line up the screw holes with
the enclosure screw posts.
7. secure the expander board to the enclosure
using the four screws previously removed.
8. Using
Figure 3.1.4c
as a guide, connect the
- mini-sas (sff-8087) cable for the top
backplane (drives 1-4)
- mini-sas (sff-8087) cable for the bottom
backplane (drives 5-8)
- Rear left fan cable
- Rear right fan cable
- 4-pin power
9. for the 16-pin head connection, use
Figure
3.1.4d
as a guide for the proper positioning.
10. once all connections have been made,
affix the top cover and secure with the
thumbscrew.
11. Install the Jupiter storage unit into your
desired location.
12. Upon powering on the Jupiter storage unit,
check to make sure the following items are
functioning properly:
- Drives
- front panel leD board
- enclosure fans
13. If anything is not functioning properly, review
the previous steps. Contact technical support
if problems are still present.
3.2 REGULAR MAINTENANCE
The Jupiter expander Rack 835 storage system
You should periodically:
- Check all system fans for functionality (PsU fans, chassis fans, expander board fan)
- Clear any fans of dust/debris
- Clear inside unit of dust/debris
- Clear drive trays of dust/debris
17
Figure 3.1.4d
Blue
Re
d
Gr
een
Yello
w
Br
own
Black
W
hit
e
Gr
ey
