USER'S MANUAL
General instructions for use
(Rev. 0)
I-Max Touch (110-120V)
79
NOTE:
If you try to perform a new exam before the cooling period has elapsed (4
minutes), the following message will be displayed indicating the time to
wait before performing a new examination:
T U B E C O O L I N G
P L E A S E W A I T x x x s
The waiting time allows the anode in the radiogenic tube to cool down.
WARNING:
After every examination, clean the chin support, the handles and
the temple clasps group thoroughly.
NOTE:
If, during the exposure, the patient moves, or the machine collides with
the patient himself (or with any object), or you realise that the
parameters set are not correct, you must release the X-ray button
immediately, interrupting the emission of X-rays and the movement of
the arm.
If this occurs, the following message will be displayed:
E
2 0 6
P R E S S
> 0 <
all the motors will switch off, and it will be possible, if necessary, to
manually rotate the arm, allowing the patient to come out;
it is
recommended that this movement be made with great care in order
to prevent damage to the machine
.
Then press the "Patient Entrance" (6) key and the display
will show:
M A C H
I N E S E T T I N G
P
R
E
S
S
>
0 <
and then:
W A I T
F O R
M A C H
I N E S E T T I N G
The system now returns to its initial position and the patient must be
repositioned.
*
*
Summary of Contents for I-Max Touch
Page 1: ...Version 25 September 2009 Rev 0 I Max Touch 0459 110 120V version User s Manual...
Page 5: ...USER S MANUAL Contents I Max Touch 110 120V Rev 0 iv THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 129: ...USER S MANUAL Maintenance I Max Touch 110 120V Rev 0 124 THIS PAGE IS INTENTIONALLY LEFT BLANK...
