Output Technology EuroLine Series, Operator'S Manual

Page: 22 / 73

14 Startup
3. Align paper perforation to the TOF arrow on the platen. If the printer
has to TOF arrow, follow the previous illustration and align the
perforation so it is about 1/3 of the distance below the top of the
leftmost ribbon guide, or even with an alignment hole in the left end of
the platen:
Press and release LINE FEED to advance a single
line.
Press and hold LINE FEED to advance multiple lines
Press UP ARROW and DOWN ARROW for fine
adjustments.
4. Press TOP OF FORM when paper is properly
adjusted.
The printer beeps to acknowledge the setting.
BEGIN PRINTING
If the printer is off line, press ON LINE. On Line is displayed and the
printer is ready to accept data.