Otto Bock Meridium 1B1, Instructions For Use Manual, Page: 67 / 284

Ottobock | 67
Beep signal Vibration
signal Additional action per­
formed Event
2x short 2x short Weight placed on prosthetic
leg and leg kept still for 1
second Switching to MyMode 1 (mode 2)
carried out.
3x short 3x short Weight placed on prosthetic
leg and leg kept still for 1
second Switching to MyMode 2 (mode 3)
carried out.
13.2.2 Warnings/error signals
Error during use
Beep signal Vibration signal Event
3x long Battery charge level under 25%
5x long Battery charge level under 10%
10x long 10x long Battery charge level under 5%
Beep signal Vibration signal Event Required action
1 x short at interval of
approx. 5 seconds Overheated hydraulic
unit Reduce activity
10 x short 10 x long Battery charge level
under 5 % Charge battery
5 long beep signals
when malfunction
occurs Error of moderate
severity
:
e.g. a sensor is not
operational
Switch to safety
mode.
Restricted walking pos­
sible.
The product must be
inspected immediately by
a prosthetist.
5 x short at interval of
5 minutes Active safety mode Restricted walking pos­
sible.
The product must be
inspected immediately by
a prosthetist.
30 x long Intermittent for
5 minutes
Severe error
e.g. failure of valve
drives
Possibly no switching
into safety mode.
Restricted walking pos­
sible.
Attempt to reset this error
by connecting/discon­
necting the battery char­
ger.
If the error persists, it is
no longer permissible to
use the product. The
product must be inspec­
ted immediately by a
prosthetist.