44 | Ottobock
CAUTION
Improper mode switching
Falling due to unexpected behaviour of the product because of changed damping behaviour.
►
Ensure that you stand securely during all switching processes.
►
Verify the changed damping characteristics after switching and observe the feedback
from the acoustic signal emitter.
►
Switch back to basic mode once the activities in MyMode have been completed.
►
Take the weight off the product and correct the switching, if required.
CAUTION
Using prosthetic foot without footshell
Falling due to slipping when walking on smooth floor surfaces (tiles).
►
Do not use the prosthetic foot without the accompanying footshell.
CAUTION
Using prosthetic foot with a damaged foot shell
>
Falling due to unexpected product behaviour as the result of malfunction.
>
Falling due to breakage of load-bearing components.
►
Do not use the prosthetic foot when the foot shell is damaged. Replace damaged foot
shells immediately, before using the product again.
4.8 Notes on the safety modes
CAUTION
Using the product in safety mode
Falling due to unexpected behaviour of the product because of changed damping behaviour.
►
Observe the warnings/error signals (see Page 67).
CAUTION
Safety mode cannot be activated due to malfunction caused by water penetration or
mechanical damage
Falling due to unexpected behaviour of the product because of changed damping behaviour.
►
Do not continue using the defective product.
►
Contact your prosthetist immediately.
CAUTION
Safety mode cannot be deactivated
Falling due to unexpected product behaviour because of changed damping behaviour.
►
If you cannot deactivate safety mode by recharging the battery, a permanent malfunction
has occurred.
►
Do not continue using the defective product.
►
The product must be inspected by an authorised Ottobock Service Centre. The prosthet
ist is your contact person.
CAUTION
Safety signal occurs (ongoing vibration)
Falling due to unexpected behaviour of the product because of changed damping behaviour.