Ottobock | 57
Product
change
1. Basic Mode
1
2
3
100%
1. Basic Mode
2. Golf
1) Tap the symbol of the MyMode (1) you want in the main
menu of the app.
→
A security question for changing the MyMode appears.
2) If you want to change the mode, tap the "
OK
" button.
→
A beep signal sounds to confirm the switch.
3) After switching, a symbol (2) is displayed to identify the act
ive mode.
→
The current mode is also indicated by the symbol and
name on the lower edge of the screen (3).
8.3.2 Switching MyModes using motion patterns
Information on switching
•
Switching and the number of motion patterns must be activated in the adjustment software.
•
Before further activities, always check whether the selected mode corresponds to the
required motion type.
Switching process
1) Hold the prosthetic leg under the body.
2) Using the heel of the prosthetic foot, knock on a solid obstacle behind you (e.g. a wall)
according to the number of the configured MyMode (MyMode 1 = 3 times, MyMode 2 = 4
times, MyMode 3 = 5 times). This can also be done by tapping against the tip of the shoe of
the contralateral leg.
→
A beep and vibration signal will sound to confirm that the motion pattern has been recog
nised.
3) Lean the prosthetic foot slightly to the back and place weight on the forefoot.
INFORMATION: If the prosthetic foot is strongly dorsiflexed, weight can be placed on
the heel.
4) Hold the prosthetic leg still.
→
A confirmation signal will sound to indicate that the foot successfully switched to the cor
responding mode (2 times = mode 2, 3 times = mode 3, 4 times = mode 4).
INFORMATION: If this confirmation signal does not sound, weight was not placed
on the prosthetic foot correctly or not for enough time. Repeat the process to cor
rectly switch to the desired mode.
8.3.3 Switching on ankle lock
Information on switching
•
The ankle lock must be configured as MyMode "". In addition, the number of motion patterns
used to switch it on must be activated in the adjustment software.
•
Before further activities, always check whether the selected mode corresponds to the
required motion type.
Switching process
1) Hold the prosthetic leg under the body.