3.7.3.2 Replacing the Foot Plate
1) Unscrew the size 5 Allen head screw at the under foot rest bar (see fig. 56).
2) Remove the foot plate (see fig. 57).
3) To reassemble, perform these steps in reverse order. Tighten the Allen head screw to
10 Nm
.
56
57
3.7.3.3 Replacing the Foot Plate
The instructions for the CV model apply (see Page 18).
3.7.3.4 Replacing the Tube Foot Rest
1) Flip up the tube foot rest.
2) Release and flip up the lateral cover for the angle adjustment (see fig. 58, item 1).
3) Unscrew the size 5 Allen head screw (see fig. 58, item 2).
4) Remove/replace the tube foot rest from the lateral mounting (see fig. 59).
5) Position the tube foot rest in place and tighten the Allen head screw to
10 Nm
.
6) Set the width of the tube foot rest by adjusting the screw (see fig. 60).
7) Flip down the tube foot rest and close the lateral cover for the angle adjustment.
58
59
60
61
22
Service Work
Avantgarde CV / CS / CLT
Summary of Contents for Avantgarde CLT
Page 1: ...Service manual Avantgarde CV CS CLT...
Page 61: ...61 Avantgarde CV CS CLT...
Page 62: ...Avantgarde CV CS CLT 62...