Otto Bock Avantgarde CLT, Service Manual

Page: 23 / 64

3.7.3.5 Replacing the Tube Foot Rest Mounting
1) Unscrew the size 3 Allen head screw on the tube foot rest mounting (see fig. 61).
2) Remove/replace the tube foot rest mounting.
3) Tighten the Allen head screw on the tube foot rest mounting to the point that flipping up and down without
clearance is possible.
3.8 Assembly C: seat, seating system
3.8.1 Replacing the Standard/Business Seat Upholstery
1) Slightly fold the wheelchair and remove the seat cushion.
2) Remove the protective cap (see fig. 62).
3) Remove/replace the seat upholstery from the cross-brace (see fig. 63).
4) If necessary, tighten the seat upholstery with the aid of the hook-and-loop connector on the bottom of the seat
upholstery (see fig. 64).
5) Push the new seat upholstery onto the cross-brace.
6) Push on the protective cap.
7) Unfold the wheelchair. In doing so, the cross-brace must seat fully in the support guides.
62 63
64
3.8.2 Replacing the Seat Upholstery, Adaptable
1) Slightly fold the wheelchair and remove the seat cushion.
2) Remove the seat pad.
3) Remove the protective cap (see fig. 65).
4) Remove the seat upholstery from the cross-brace (see fig. 66).
5) Remove/replace the upholstery bar (see fig. 67).
6) Replace the seat upholstery.
7) To reassemble, perform these steps in reverse order.
8) If necessary, adjust the seat upholstery with the aid of the upholstery strap hook-and-loop connector (see
fig. 68).
23 Avantgarde CV / CS / CLT
Service Work