153
154
155
156
3.12.6 Maintenance Work on the Rear Wheel
3.12.6.1 Replacing the push rings / adjusting the "narrow/wide" mounting position
1) Completely remove the tyre (see fig. 157).
2) Unscrew/remove the push ring screws from the rim (see fig. 158).
3) Tightly bolt the push rings onto the rim in narrow or wide installation position.
4) Completely reinstall the tyre.
157
158
3.12.6.2 Replacing/Retrofitting a Spoke Protector
The spoke protector serves to protect the spokes and prevents reaching into the rotating rear wheels.
Snap fasteners (attachment nipples) are used for installation.
1) Remove the rear wheels.
2) Position the spoke protector on the rim so that it is centred and you can see a spoke beneath each of the six
bore holes.
3) From the outside, press in the attachment nipples e.g. with a hammer handle until you hear them lock in place
on the spokes (see fig. 159).
INFORMATION: Screw connections are required for installation in some versions (
see fig. 160
).
44
Service Work
Avantgarde CV / CS / CLT
Summary of Contents for Avantgarde CLT
Page 1: ...Service manual Avantgarde CV CS CLT...
Page 61: ...61 Avantgarde CV CS CLT...
Page 62: ...Avantgarde CV CS CLT 62...
