39
40
3.7.2.2 Replacing the Foot Rest Bar/Swivel Segment
1) Remove the footrest.
2) Unscrew/remove the set screws on the swivel segment (see fig. 41, see fig. 42).
3) Remove the foot rest bar from the swivel segment (see fig. 43). Replace the foot rest bar/swivel segment if
necessary.
4) Slide the foot rest bar at least
40 mm
into the swivel segment.
INFORMATION: A mark on the foot rest bar indicates the minimum distance the foot rest bar must be
inserted during installation.
.
5) Tighten the set screws to
8 Nm
.
41
42
43
3.7.2.3 Replacing the Foot Plate
1) Remove the foot rest.
2) Unscrew the size 4 Allen head screws on the angle adjustment (see fig. 44).
3) Replace the foot plate.
4) To reassemble, perform these steps in reverse order. Tighten the Allen head screw to
10 Nm
.
18
Service Work
Avantgarde CV / CS / CLT
Summary of Contents for Avantgarde CLT
Page 1: ...Service manual Avantgarde CV CS CLT...
Page 61: ...61 Avantgarde CV CS CLT...
Page 62: ...Avantgarde CV CS CLT 62...
