OSTLING PinMark UMC box, Operation Manual

Page: 57 / 105

B_PM_UMCbox_en04.doc
ÖSTLING Markiersysteme GmbH Operation
4-25
6. Enter the import options (see also Fig. 10272):
- "Active line number": enter the line number of the file with the data to
be imported, from which the import is started. Each line of the file is
used as a mask.
- "Separator": enter the character that separates the individual texts in
one line, e. g. ;. The entire text between separators is inserted into a
text field of the mask.
- "Strip spaces": select if you don't want to mark leading space charac-
ters.
- "Delete file when done": select if the file is to be deleted after the
import.
7. Select .
"Preview" appears. Since the marking speed is by default set to 0 mm/s in
new text fields, the text in the preview is displayed in blue colour.
8. Select Edit and enter a marking speed "V [mm/s]" > 0.
6.2 Changing the mode
3 different modes are available at the control:
•
Work mode: files (projects and masks) can be loaded and marked.
•
Edit mode: files (projects and masks) can be loaded, changed and marked.
It is also possible to create new masks and projects.
•
Service mode: all operating functions are possible. E. g. also system para-
meters can be changed.
The mode of the control can be changed at any time. If the edit and/or service
mode is protected with a password, (see page 4-34), the password must be
entered.
1. Select Edit > Mode .
"Password Dialog" appears.
2. Select the desired mode.
3. If the desired mode is protected with a password, you have to enter the
password: enter password.
4. Select .
Control is changed to the selected mode.