OSTLING PinMark UMC box Operation Manual Download Page 12 | Manualshive

Page: 12 / 105

background image

B_PM_UMCbox_en01.doc

1-6

Safety

ÖSTLING Markiersysteme GmbH

When  using  the  intended  operational  funds  the  instructions  for  use  must  be
kept.  As  far  as  a  safety  data  sheet  (European  guideline  91/155/EWG)  of  the
manufacturer  for  operational  funds  is  prescribed,  the  references  made  there
must be considered obligatorily, like e. g.:

•

Chemical characterization.

•

Physical and safety-relevant data.

•

Transport.

•

Regulations.

•

Safety measures, Storage and Handling.

•

Measures to be taken in case of fire and accidents.

•

Toxicological information.

•

Ecological information.

This applies in particular to the adequate disposal of operational funds. For this
the safety data sheet indicates the prescribed kind of disposal and the waste
key. The safety data sheet can be requested with the manufacturer of the
operational funds.

3.3 Measures of the manufacturer

All marking systems are series equipped, complete with all necessary safety
devices. During operation, all safety rules and rules for the prevention of acci-
dents must be kept.

Movable, sharp-edged parts!

Risk of injury.

Do not reach into the marking head during the marking.

Do not reach into the traversing range of the marking tool during the mar-

king.

When coining, the carbide point of the marking tool is brought to oscillating by
compressed air. Then the carbide point is moved. The stroke of the marking

tools is approx. 1 - 5 mm. Therefore reaching into the danger area is only
possible with difficulty. Due to the low force, with which the carbide point
oscillates, heavy injuries of the operator are to be excluded.

Coining

«
...
10
11
12
13
14
...
»

Summary of Contents for PinMark UMC box










































































































Reviews:

No comments

Related manuals for PinMark UMC box

Brand: Ubisys Pages: 2

Brand: Balboa Instruments Pages: 10

Brand: Quantum Data Pages: 36

Brand: Eaton Pages: 166

Brand: 1Control Pages: 8

VLT AutomationDrive FC 302

Brand: Danfoss Pages: 128

VLT DriveMotor FCP 106

Brand: Danfoss Pages: 4

Brand: IBM Pages: 20

Brand: DAV TECH Pages: 24

Brand: OBSIDIAN CONTROL SYSTEMS Pages: 16

LDSBus LC020101A-F

Brand: BRT Systems Pages: 15

Brand: GeoVision Pages: 21

Brand: Qianjin Electronic Pages: 39

MSI-EM-IO84NP Series

Brand: Leuze electronic Pages: 22

Brand: salmson Pages: 33

AquaLink RS All Button

Brand: Jandy Pages: 2

BoxControl Compact

Brand: elero Pages: 8

Brand: Festo Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands