OSTLING PinMark UMC box, Operation Manual

Page: 10 / 105

B_PM_UMCbox_en01.doc
1-4
Safety ÖSTLING Markiersysteme GmbH
3.2 Measures taken by the user/operator
Consider warning plates and references
Within operation and handling of the marking system, dangers can arise if not
handled with proper care. In this manual, operating instructions are given,
including appropriate warning references in the front. In addition, warning plates
can be found on the marking system.
Note
Mind the warning references!
Mind the commands and interdictions of the warning references. They serve for
your protection.
These warning references include:
•
A symbol.
•
References to the source and the kind of the danger.
•
Instructions, how you can avoid the danger.
Example:
Heavy soiling impairs the marking system!
Marking system does not work efficiently any more.
With heavily soiled ambient air use bellows (option) as cover.
Maintain marking system regularly.
Personnel instruction
The marking system may be served, waited and repaired only by authorized,
trained and instructed personnel.
Work on the electrical and pneumatic equipment may be implemented only by
specially trained specialists.
In addition, the following measures must be taken before the personnel begins
the work of using the marking system:
•
Instructs over arising dangers.
•
The user must obligate, to the extent necessary, the personnel for carrying
protective clothing and gloves.
•
Competencies for operation, maintenance and repair must be clearly
specified, so that under the aspect of safety no unclear authority arises.
•
Read the technical documentation of the marking system. It is recommen-
ded to the user to be confirmed in writing in each case that the personnel
has read and understood the technical documentation.