ORTEC
®
Detective-EX/DX
®
-100T Portable HPGe Spectrometer — User’s Manual
931040P / 1014
12
Figure 6. The Detective-EX-100T
Rear Panel.
2.2.2. Rear-Panel Connectors
Figure 6 shows the Detective-EX rear-panel, including
the three connectors:
!
INPUT POWER — Supplies external power
for operating the instrument and recharging the
internal battery.
!
DATA — USB connector used to connect the
unit to a computer to transfer stored spectra.
!
CONTROL — USB port connects the
Detective-EX’s MCA board to a computer for
use as an HPGe spectrometer with MAESTRO.
Stored spectra cannot be downloaded from this
port.
!
Headphone jack (
) — For dose and count rate warning sounds. The headphone volume
can be adjusted as described in Section 5.2.8.
Each connector includes a dust cover.
NOTE
We strongly recommend that the dust cover be fastened in place at all times to protect
the card slots from moisture and particulates.
2.2.3. The Touchscreen
Figure 7 shows the user interface on the Detective-EX’s high-resolution color touchscreen,
which makes it easy to view data acquisition and settings, as well as change the instrument
settings.
To select a function, tap it with your finger or a stylus (pens, pencils, and other objects will
scratch the touch-screen and should not be used). In fields where alphanumeric input is needed,
tap to open the “soft keyboard” at the bottom of the screen (see Fig. 56 on page 57).
Summary of Contents for Detective-DX-100T
Page 4: ...iv Intentionally blank ...
Page 10: ...x ...
