Ormec SMLC 160, Installation & Operation Manual

Page: 23 / 66

ServoWire Motion & Logic Controller Manual SMLC System Components
J16 – Ethernet Port EN1
J17 – Ethernet Port EN0
The Ethernet interface ports use an industry standard Intel chips on both EN0 (10/100BaseT) and EN1
(10/100/1000BaseT). They can be used for networking with WAGO I/O, Ethernet/IP, MODBUS/TCP
based HMI packages or communications with the CoDeSys IDE or OPC Server as well as general purpose
TCP/IP communications.
Figure 7, SMLC ‐ Ethernet Connector (J16 & J17) connector
Pin Signal Description
8 NC NC = No Connection
7 NC
6 RXD ‐ Ethernet 10/100 Base ‐ Tx differential receiver inputs.
5 NC
4 NC
3 RXD+ Ethernet 10/100 Base ‐ Tx differential receiver inputs.
2 TXD ‐ Ethernet 10/100 Base ‐ Tx differential transmitter outputs.
1 TXD+ Ethernet 10/100 Base ‐ Tx differential transmitter outputs.
Table 6, Ethernet Port (J16 & J17) pin ‐ out.
Ethernet Cables & Accessories
EI8 ‐ 10T Ethernet Hub, 10BASE ‐ T, 8 port, 24 VDC input, rail mount
405TX Ethernet Switch, 10BASE ‐ T, 5 port, 24 VDC input, rail mount
CBL ‐ ENET/3 Cable, Ethernet, RJ45, 3 ft.
CBL ‐ ENET/7 Cable, Ethernet, RJ45, 7 ft.
CBL ‐ ENET/10 Cable, Ethernet, RJ45, 10 ft.
CBL ‐ ENET/25 Cable, Ethernet, RJ45, 25 ft.
CBL ‐ ENET/50 Cable, Ethernet, RJ45, 50 ft.
CBL ‐ ENET/75 Cable, Ethernet, RJ45, 75 ft.
CBL ‐ ENET/100 Cable, Ethernet, RJ45, 100 ft.
DO NOT USE CROSSOVER CABLES WITH A HUB. Crossover cables are used for
connecting only two devices together. Example: SMLC to WAGO I/O without a
hub.
CBL ‐ ENET X /3 Cable, Ethernet crossover , RJ45, 3 ft.
CBL ‐ ENET X /7 Cable, Ethernet crossover , RJ45, 7 ft.
CBL ‐ ENET X /10 Cable, Ethernet crossover , RJ45, 10 ft.
CBL ‐ ENET X /25 Cable, Ethernet crossover , RJ45, 25 ft.
Table 7, Ethernet Cables & Accessories part numbers
SMLC ‐ 004a 15