Ormec SMLC 160, Installation & Operation Manual

Page: 16 / 66

ServoWire Motion & Logic Controller Manual SMLC System Components
conditions specified in the product manual and Standards. Some applications may require
consideration of special packaging, cooling, electrical noise protection, etc. for reliable
operation.
Receiving and Inspection
ORMEC ServoWire Motion & Logic Controller and their associated accessories are put through rigorous
tests at the factory before shipment. After unpacking, however, check for damage, which may have
been sustained in transit. Check the SMLC and any of the accessories for bent or broken components,
loose bolts or screws and any other physical damage before installing.
NOTE: Save the original SMLC packaging material for shipping returned units.
Included with your SMLC is a CD package, which contains installation disks, Users Guide, license
agreement, and registration card. Please open this package, read the license agreement, and fill out and
return the registration card. SMLC operates on the QNX operating system, with the RUN ‐ TIME License
pre ‐ installed on your SMLC.
Panel Mounting and Environment
Panel mounting data is available in the SMLC Mechanical and Environmental Specifications section of
this chapter. The controller's environment should be maintained as follows:
•
Operating temperature should be between 0 and 50C (32 o F to 122 o F).
•
The SMLC should be mounted in a grounded metal enclosure
•
If the electrical panel is subject to vibration, mount the unit on shock absorbing material.
•
Avoid use in corrosive atmospheres, which may cause damage over time.
•
Select a location with minimum exposure to oil, water, hot air, high humidity, excessive dust or
metallic particles.
•
The proper mounting orientation for the SMLC is vertical on a panel using the mounting holes (3)
provided on the base plate.
8 SMLC ‐ 004a