IES-3162GC
User’s Manual
ORing Industrial Networking Corp
27
The following table describes the labels in this screen.
Label
Description
DHCP Server
Enable or Disable the DHCP Server function. Enable
– the
switch will be the DHCP server on your local network
Start IP Address
The dynamic IP assign range. Low IP address is the beginning
of the dynamic IP assigns range. For example: dynamic IP
assign range is from 192.168.1.100 to 192.168.1.200.
192.168.1.100 will be the Start IP address.
End IP Address
The dynamic IP assign range. High IP address is the end of the
dynamic IP assigns range. For example: dynamic IP assign
range is from 192.168.1.100 to 192.168.1.200. 192.168.1.200
will be the End IP address
Subnet Mask
The dynamic IP assign range subnet mask
Gateway
The gateway in your network.
DNS
Domain Name Server IP Address in your network.
Lease Time (Hour)
It is the period that system will reset the assigned dynamic IP to
ensure the IP address is in used.
Apply
Click “
Apply
” to activate the configurations.
5.1.5.2
DHCP Server
– Client List
When the DHCP server function is activated, the system will collect the DHCP client
information and display in here.
DHCP Server Client Entries interface
5.1.5.3
DHCP Server
– Port and IP bindings
You can assign the specific IP address which is in the assigned dynamic IP range to the
specific port. When the device is connecting to the port and asks for dynamic IP assigning,
the system will assign the IP address that has been assigned before in the connected device.
