Oriental motor LAS Series, Operating Manual

Page: 43 / 44

Options (sold separately)
43
▐
12 Options (sold separately)
„
Photomicrosensor set (NPN output)
Use this photomicrosensor for home-position and end limit.
Model:
PARP-PS2B [for 60 mm (2.36 in.) square]
PARP-PS4B [for 80 mm (3.15 in.) square]
„
Standard motor extension cable
Required to extend the distance between the lineard motor and driver.
Be sure to use a dedicated extension cable for electromagnetic brake if you are using a lineard motor with
electromagnetic brake.
Model for standard type Model for electromagnetic brake type Cable length [m (ft.)]
CC01AIP CC01AIPM 1 (3.3)
CC02AIP CC02AIPM 2 (6.6)
CC03AIP CC03AIPM 3 (9.8)
CC05AIP CC05AIPM 5 (16.4)
CC07AIP CC07AIPM 7 (23)
CC10AIP CC10AIPM 10 (32.8)
CC15AIP CC15AIPM 15 (49.2)
CC20AIP CC20AIPM 20 (65.6)
„
Flexible motor extension cable
Highly flexible cable required to extend the distance between the lineard motor and driver.
Model for standard type Model for electromagnetic brake type Cable length [m (ft.)]
CC01SAR CC01SARM2 1 (3.3)
CC02SAR CC02SARM2 2 (6.6)
CC03SAR CC03SARM2 3 (9.8)
CC05SAR CC05SARM2 5 (16.4)
CC07SAR CC07SARM2 7 (23)
CC10SAR CC10SARM2 10 (32.8)
„
DIN rail mounting plate
Plate for mounting the driver to a DIN rail [35 mm (1.38 in.)].
Model:
PADP01
„
Driver cable
Cable with connectors for driver control input/output signals (36 pins), providing excellent noise resistance.
Model:
CC36D1-1 [1 m (3.3 ft.)]
CC36D2-1 [2 m (6.6 ft.)]
„
Connector-terminal block conversion unit
Use this cable to connect the driver to a host controller via the terminal block. [Cable length: 1 m (3.3 ft.)]
Model:
CC36T1