Oracle Sun Server X4-4 Installation Manual Download

Page: 119 / 148

Configuring the Preinstalled Oracle VM

Software

At initial release, the Sun Server X4-4 offers the option of a preinstalled Oracle VM Sever

3.2.x software image on your server. If you purchased this option, finish the installation by

configuring the preinstalled software. The preinstalled software image contains all of the

necessary drivers for your server model.

Note -

For up-to-date information about supported versions of the preinstalled Oracle VM

software, refer to the

Sun Server X4-4 Product Notes

http://www.oracle.com/goto/X4-4/

docs

Perform the procedures in the following sections in the order listed.

Step

Tasks

Links

Review requirements for Oracle VM software.

“Preinstalled Oracle VM Server Compatibility

Requirements” on page 119

Gather the information you will need during the

configuration process.

“Oracle VM Configuration

Worksheet” on page 120

Configure the preinstalled Oracle VM software.

“Configure the Preinstalled Oracle VM

Server” on page 121

Review the Oracle VM documentation for

information about registering, updating and using

Oracle VM.

“Oracle VM Documentation” on page 124

Preinstalled Oracle VM Server Compatibility Requirements

If you use the Oracle VM Server software that is preinstalled on your system, you must ensure

that it is compatible with the version of Oracle VM Manager that you use to manage your

Oracle VM infrastructure. If necessary to achieve compatibility, upgrade your Oracle VM

Server or Oracle VM Manager so that they are at the same version.

Configuring the Preinstalled Oracle VM Software

119

Summary of Contents for Sun Server X4-4





















































































































































Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands

Oracle Sun Server X4-4, Installation Manual

Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands