Optos P200T E Series User Manual Download Page 37 | Manualshive

Page: 37 / 72

Optos P200T E Series User Manual Download Page 37

Chapter 3 - How to...

3.2.3 How to align the patient

Initial patient alignment is the same for all image capture procedures.

3.2.3.1 Patient coaching

You should coach the patient so that they know what is going to happen, and to help put them at ease.

Explain the following information to the patient:

1. During the session you will capture a series of images. The patient should stay in position for the

duration of the session, if possible. There will be opportunities for the patient to rest and blink. You will
tell the patient when they can rest and blink and when they should try to stay still.

2. The patient should sit as upright as they can, with their mouth closed and their teeth together. This will

help reduce movement when images are being captured.

3. The patient's head will be supported by a head rest and a chin rest. The head rest will be positioned

first, and then the chin rest. Both may be adjusted before the image is captured, but it is better to get
comfortable, and firmly supported, from the start.

4. The patient should look for the patient alignment target, see

Patient Alignment Guide

on page 71. The

alignment colors seen by the patient are also shown on the touch screen, so you will see the alignment
feedback they can see.

5. The patient should choose one of the central corners of the alignment target. The patient will be asked

to look at their chosen corner when being imaged.

3.2.3.2 Align the patient

1. Prepare the device, see

How to prepare for image capture

on the previous page. Select the patient and

select

To capture

.

2. When you can see the live camera view, ask the patient to sit up straight in front of the device.

3. Stand to the side of the patient where you can reach the touch screen, the table height switch, and

from where you can monitor the position of the patient's face.

4. Adjust the table or chair so that the patient’s pupil height is aligned to the center of the face pad

aperture. Take care to ensure that cables are not trapped. You can use the

canthus

1

mark as an

additional guide.

FIGURE 10: Position of the canthus mark on the covers

1. The inner or outer corner of the eye where the upper and lower eyelids meet.

Part Number: G110230/1ENG

Page 37 of 72

Copyright 2019, Optos plc. All rights reserved.

English

«
...
35
36
37
38
39
...
»

Summary of Contents for P200T E Series









































































Reviews:

No comments