Optos P200T E Series User Manual Download Page 23

Page: 23 / 72

Chapter 2 - Introduction

No. Name of Part

Description

Status indicator

The color changes to show the status of the device, see

Status indicator

page 50.

Touch screen

The touch screen monitor is used to interact with the system. It displays
alignment feedback and captured images.

Hand control

The hand control comprises buttons used to adjust the patient alignment and
capture images.

Image server

Runs the Optos

Advance

software and lets you manage the networked images.

The image server will also let you review and analyze patient images.

Customer network

Switches, Firewalls, Internet access, Review clients, Virtual image server (if
required)

Patient
environment

The image server, switch and any browser-based review clients or monitors must
be positioned outside the patient environment; more than 1.5 meters (5 ft) from
the scan head.

Note

The device also includes a user guide, power cable and ethernet cable not shown on this diagram.

A table may also be supplied.

2.6.2 Network specification and characteristics

The following network specification is recommended when connecting the image server to a Wide Area
Network (WAN).

TABLE 1: Network specification

Network specification details

Installation

Scan head and image server PC

Connection type

LAN TCP/IP ipV4

Connection speed

1 Gbps recommended

Connection security

All transport HTTPS by default

Connection ports (defaults)

443, 56620

Unused ports

Locked on scan head and image server PC

Part Number: G110230/1ENG

Page 23 of 72

English

Summary of Contents for P200T E Series






































































Search results

Summary of Contents for P200T E Series

Reviews:

Optos P200T E Series, User Manual, Page: 23 / 72

Search results

Summary of Contents for P200T E Series

Reviews: