Optos P200T E Series User Manual Download Page 31

Page: 31 / 72

Chapter 3 - How to...

Note

You should follow the correct procedure in order to protect the integrity of the information on the disk
drives.

You should back-up your image server data at least once a week.

You must put the scan head into standby mode at the end of each working day.

1. End the current session and select

on the touch screen to put the device into standby mode.

2. The status indicator will turn blue when the device is in standby mode. The touch screen will switch off

when the device is in standby mode.

3. Fit the dust cap in the face pad and place the fabric cover over the scan head after the scan head is in

standby mode.

3.1.2.1 Shut down the scan head

You should not usually have to shut down the scan head.

1. Follow the instructions to put the scan head into standby mode, see

Use standby mode at the end of

each day

on the previous page.

2. When the status indicator has turned blue you can turn off the power supply. The power switch is

located at the at the back of the scan head. The off position is marked "

3. Fit the dust cap in the face pad and place the fabric cover over the scan head

3.1.2.2 Log off the image server each day

You should log off the image server at the end of each day.

1. Exit Optos

Advance

2. Select the "Windows" button.

3. Select

Log off

Note

Image files cannot be viewed on browser-based review clients when the image server has been
shut down.

Restart the image server each week to allow updates to install, see

Restart the image server each

week

below.

3.1.2.3 Restart the image server each week

CAUTION

Exit Optos

Advance

before turning off the image server.

You should restart the image server each week to allow updates to install.

1. Exit Optos

Advance

2. Select the "Windows" button.

3. Select

Restart

Part Number: G110230/1ENG

Page 31 of 72

English

Summary of Contents for P200T E Series






































































Search results

Summary of Contents for P200T E Series

Reviews:

Optos P200T E Series, User Manual, Page: 31 / 72

Search results

Summary of Contents for P200T E Series

Reviews: