Optos P200T E Series User Manual Download Page 32

Page: 32 / 72

Chapter 3 - How to...

3.1.3 Use the system

Before setting up and capturing images, ensure you are familiar with the device and equipment.

3.1.3.1 Using the touch screen

The touch screen is connected to the scan head and controls the scan head and capture functionality.

Some of this functionality is also available on the hand control, see

Using the hand control

below.

The options are selected by touching an option or pushing the control in the required direction.

TABLE 3: List of touch screen icons

Icon

Description

Change laterality

Changes the laterality of the captured image.

Discard

Deletes the current image or scan.

Declutter

Removes all icons to show a full sized image. Select the icon again to show all the controls.

Image Browser

Displays the images and scan which will be saved at the end of the session. You can change
laterality and delete images and scans.

The image browser can be used to select a suitable SLO image at the start of the OCT capture
process.

Cancel

Cancels the current action without saving changes.

Finished

Completes the current action.

Shut down device

3.1.3.2 Using the touch screen keyboard

The touch screen keyboard uses the same layout as a standard keyboard in your language.

As needed, accented or special characters may be available by pressing and holding keys with a symbol in
the upper right corner.

3.1.3.3 Using the hand control

The hand control is used to adjust the scan head XYZ alignment.

When capturing OCT scans the hand control can also be used to adjust the scan, see

How to optimize OCT

scan quality

on page 45. The retina view will update in real time to show the location of the scan.

Page 32 of 72

Part Number: G110230/1ENG

English

Summary of Contents for P200T E Series






































































Search results

Summary of Contents for P200T E Series

Reviews:

Optos P200T E Series, User Manual, Page: 32 / 72

Search results

Summary of Contents for P200T E Series

Reviews: