Optos P200T E Series User Manual Download Page 16 | Manualshive

Page: 16 / 72

Optos P200T E Series User Manual Download Page 16

Chapter 1 - Warnings and cautions

CAUTION

Ensure the mains socket is easily accessible.

1.7 Cleaning guidelines

The device cleaning instructions are detailed in

on page 52. Adhere to the following cautions while

cleaning the device.

CAUTION

Cleaning patient contact parts

In order to prevent any contamination always clean and disinfect parts of the equipment
which will be in contact with the patient, see

Cleaning before each patient

Adequate cleaning and disinfection is necessary to prevent disease transmission.
Thoroughly clean and disinfect the equipment surfaces that contact the patient and all
equipment surfaces likely to become soiled during use.

Do not attempt to wash or immerse the patient contact parts (for example, forehead pad,
chin pad and face pad) in water or cleaning fluid.

CAUTION

Cleaning the main mirror

The mirror can be damaged during cleaning. Preventing mirror contamination reduces the
risk of damaging the mirror. It is not recommended to routinely clean the main mirror. Only
clean the mirror if dust particles, smudges or spots have accumulated on its surface.

When cleaning the main mirror, do not rub the spots too hard, as this may cause damage.

Do not touch the edges of the main mirror. The edges of the main mirror are sharp.

Only clean visible areas of the main mirror. Do not put your hand or any cleaning material
into parts of the device you cannot see.

Do not polish the mirror surfaces; clean only dust particles, smudges or spots.

Do not wear jewelry (for example rings, watches or bracelets) while cleaning the mirror
surface as this may damage the mirror.

Dispose of the dirty cloth after each wipe to avoid transferring the dust back on to the
mirror. You will have to use several wipes to clean the mirror.

Page 16 of 72

Part Number: G110230/1ENG

English

Copyright 2019, Optos plc. All rights reserved.

«
...
14
15
16
17
18
...
»

Summary of Contents for P200T E Series









































































Reviews:

No comments