Optos P200T E Series User Manual Download Page 11 | Manualshive

Page: 11 / 72

Optos P200T E Series User Manual Download Page 11

Chapter 1 - Warnings and cautions

1 Warnings and cautions

Your system is a medical device and must be operated within the safety parameters and instructions defined
in this User Guide.

If the device appears faulty or has non-functioning components, please contact your Optos representative,
see

If you have any questions regarding the correct use of your device, please contact your Optos representative
before attempting to operate the device.

Read the warnings and cautions before using your device.

1.1 General safety

WARNING

Guidance for use on patients with Epilepsy

The device uses flashes of light. Some patients with epilepsy may be sensitive to flashes
of light. Caution should be exercised for patients who have a history of reaction to camera
flashes or strobe lighting.

Equipment modifications

No modification of this equipment is allowed.

Positioning scan head on table

The scan head should be positioned in the middle of the table width. The front of the scan
head should be inline with the front of the table to allow the patient to get into the correct
alignment position.

The chin rest should slightly overhang the edge of the table.

Suitability of images

The suitability of using an image or print for viewing is determined by the clinician.

Fluorescence Imaging

Optos does not offer any guidance or advice on the injection of imaging dyes. It is
recommended that only authorized and appropriately qualified physicians or MD's can use
angiography modalities that require medical interventions.

Part Number: G110230/1ENG

Page 11 of 72

Copyright 2019, Optos plc. All rights reserved.

English

«
...
9
10
11
12
13
...
»

Summary of Contents for P200T E Series









































































Reviews:

No comments