Optiva VTDVR5100 Tytanium DVR series, Installation & User Manual

Page: 44 / 232

VTDVR5100 Digital Video Recorder
44
<Note>
The disk should be formatted with FAT32 type.
If properly connected the disk is recornized automatically as in the following pricutre. To copy images the
process is as follows; Set copy range (up to 1minute) Select drive Copy
<Note>
1. USB Flash products that required a Windows program to operate may not be recognized by the
eDVR
2. For more information about copy function, please refer to the “eDVR User’s Guide”
9.6. Connecting video in/output
eDVR’s video in/output is composed of Loop Through. eDVR recognizes the connection status and video
impedance automatically.
For example, when eDVR is connected by only video input, the video impedance is set as 75 Ω . And when
video in/output is connected simultaneously, the video impedance is changed as Hi-z. So in this case,
video impedance of external video input device(e.g. CCTV monitor) should be set as 75 Ω .