Optiva VTDVR5100 Tytanium DVR series, Installation & User Manual

Page: 200 / 232

VTDVR5100 Digital Video Recorder
200
18.3.21. Alarm Recording
This menu is to set Alarm Recording condition. After setup Recording condition, “Event recording” menu
from “Recording” must be “On” to setup Alarm recording in eDVR. Also, before setup Alarm recording,
“Alarm Source” must be set.
- Sensor / MD Pairing : Pairing means 1:1 synchronization between the channel and
Sensor/MD.
- Text : When set “On”, it deals text input of relevant channe as Alarm Event
and is saved.
- Alarm Source : Through Alarm Source, 4 Sensors and 1 MD, Text input is selectable.
Selection of MD, Text can be On/Off.
Select Preset of PTZ by relevant Alarm input.
- Recording Speed/Quality : There are all 5 conditional setup (No Rec/Low/Standard/High/Custom).
Except “Custom”, Setup condition will synchronize “Speed(ips)” and
“Quality” automatically, Speed(ips) and Quality can be set each
separately.
- Pre Alarm (sec) : It can set max. 5 second.
- Post Alarm (sec) : It can set max. 60 seconds.